Table of Contents
Advertisement
5. Lubricate the seal on the drain plug with oil and install. Tighten to the
specified torque.
Description
Drain plug
CHANGING OIL FILTER
1. Position the outboard in a level operating position.
2. Electric start models ‑ To gain clearance to the oil filter, remove the starter
solenoid along with its rubber isolation mount from the metal plate that
holds it.
a
3. Place a rag or towel below the oil filter to absorb any spilled oil.
eng
MAINTENANCE
4537
Nm
23.7
b
31995
93
31922
lb. in.
lb. ft.
210
Electric start model
a -
Starter solenoid
b -
Oil filter
17
Advertisement
Table of Contents
