Operation Mode; Edid - ATEN VM1600 User Manual

Operation Mode

The EDID, CEC, OSD and Output Status features are adjusted from the
Operation Mode menu.
1: EDID Mode: Default
2: CEC
3: OSD
4: Output Status
 EDID (extended display identification data) is used to apply a preset video
configuration (EDID Mode), which utilizes the best resolution across
different monitors.
 Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control.
 The OSD, when enabled for a port, displays real-time port switching
information on the screen.
 The Output Status shows whether the video/audio of an Output port is
turned on or off.

EDID

To adjust the EDID mode, do the following:
1. From the Operation page, press pushbutton 1 to access the EDID Mode
page:
1: EDID Mode: Default
2: CEC
3: OSD
4: Output Status
2. Press pushbuttons 1-4 to make your selection.
1: Port 1
2: Default (In use)
3: Remix
4: Customized
Chapter 3. Front Panel Operation
45