Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
The following table lists the available EDID commands:
Command Address Num
edid
a
edid
a
edid
a
edid
a
Control
Enter
zz
port1
[Enter] The EDID from Port 1 is passed to
*
zz
remix
[Enter] The VM1600 implements the EDID
*
zz
default
[Enter] ATEN's default EDID is passed to
*
zz
custom
[Enter] Implements the customized mode.
*
Chapter 5. RS-232 Commands
Description
the video source.
zz: 01~16
of each connected display
according to its connection when the
device is first powered on, or
immediately after selecting the
Remix option.
the video source.
121