No.
Component
7
Primary Power Supply This is a standard 3-pin power socket. The power cord
8
Input Board Slots
9
Output Board slots
10
Fan Module
from a source plugs in here.
Unscrew the cover to insert the Input boards into these
4 horizontal slots. The source devices connect to the
inserted Input boards.
Unscrew the cover to insert the output boards into
these 4 horizontal slots. The display devices connect
to the inserted Output boards.
This slot contains the fan module. The fan is hot-
pluggable and the panel unscrews to install a
replacement module. See Depending on any optional
equipment that you may have purchased, one of the
following may be included in your package. Contact
your ATEN dealer to purchase any of these additional
accessories., page 11, for details
Chapter 1. Introduction
Description
15