ATEN VM1600 User Manual page 127

Control
off
Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
3. Skip the Output command to mute or enable the audio of all output
ports.
The following table shows the available command list:
Command Output Num1 Address
mute o
mute o
Mute off; audio on output port is enabled
(default)
Num2
xx a zz
*
*
xx a zz
*
*
Chapter 5. RS-232 Commands
Description
Control Enter
on [Enter]
off [Enter]
Description
Mute audio for
output port xx,
on device zz
xx:01~16, *
zz: 01~16,*
Turn mute off for
output port xx,
on device zz
xx:01~16, *
zz: 01~16,*
115