Switch Port Command - ATEN VM1600 User Manual

Switch Port Command

The formula for Switch commands is as follows:
Switch Command + Input + Num1 + Output + Num2 + Address +
Num3 + Control [Enter]
1. For example, to switch input port 02 to output port 05, type the following:
sw i02 o05 [Enter]
2. To switch output port 04 to the next port, input the following:
sw o04 + [Enter]
3. To turn off video output on port 03, type the following:
sw o03 off [Enter]
4. To turn off video output on port 03 on device 02, type the following:
sw o03 a02 off [Enter]
The following tables show the possible values for the Switch Port command
Command
sw Switch command
Input
i Input port command
Num1
xx Input port
xx: 01~16
* All input ports
Output
o Output port command
Num2
yy Output port
yy: 01~16
* All output ports
Address
a Device address command
(RS-422 and RS-485 only)
Chapter 5. RS-232 Commands
Description
Description
Description
Description
Description
Description
111