ATEN VM1600 User Manual page 131

Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
3. If the Address or Profile parameter is skipped the default value will
be used.
The following table shows the available command list:
Command Profile Num1 Address
profile f
profile f
Control
load Load a saved profile
xx a
xx a
Chapter 5. RS-232 Commands
Description
Control Enter
Num2
yy save [Enter]
*
yy load [Enter]
*
Description
Save current
connection
configuration on
device yy as
profile xx
xx:01~16
yy: 01~16,*
Load profile xx
on device yy
xx:01~16
yy: 01~16,*
119