Operation Mode; Power On Detection - ATEN VM0808H User Manual

VM0808H User Manual

Operation Mode

The Power On Detection and EDID features are adjusted from the Operation
Mode menu. The Power on Detection mode automatically switches an Output
port to the next powered-on source if its video source is powered off. EDID
(extended display identification data) is used to automatically or manually
setup different video configurations via EDID modes to utilize the best
resolution across different monitors.
To adjust the Power On Detection or EDID mode, from the Main page do the
following:

Power on Detection

1. Use the MENU button to access the Menu page, turn the OUT/IN dial to
scroll down and select [ENTER] Operation Mode:
Operation Mode
Security Mode
2. With the arrow on Power On Detection, press and release the OUT, IN, or
ENTER pushbutton to access the Power On Detection options.
Power On Detection: ON
EDID: Default
3. Turn the front panel OUT/IN dial to cycle through On or Off.
4. Press and Release the OUT, IN, or ENTER pushbutton to confirm the
change.
24
OUT
ESC
MENU
ENTER
PROFILE
OUT
ESC
MENU
ENTER
PROFILE
IN
IN