VM6404H User Manual
Operation Mode
The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM6404H automatically apply a preset video configuration or EDID
Mode, which utilizes the best resolution across different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off
To configure the VM6404H's operation mode settings from the Main Screen,
use the Menu pushbutton to access the Menu page, press
next page, then press pushbutton 1 to access the Operation Mode page.
1: Operation Mode
2: Security Mode
EDID Mode
To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
22
:
Prev
:
Next
: Next
▼
to navigate to the
(Continues on next page.)