ATEN VM1600 User Manual page 129

Control
zz
Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
The following table shows the available command list:
Out
Command
put
volume o
Audio volume level
zz: 01~10 (default is 10)
Num1 Address
Num2
xx a
*
Chapter 5. RS-232 Commands
Description
Vol-
Control Enter
ume
yy v zz
*
Description
[Enter] Adjust
volume for
output port
xx, on device
yy, to level zz
xx:01~16, *
yy: 01~16,*
zz: 01~16,*
117