Operation Mode; Edid Mode - ATEN VM5404D User Manual

VM5404D / VM5808D User Manual

Operation Mode

The EDID Mode, OSD and Output Status features can be configured from the
Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM5404D / VM5808D automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off
To configure the VM5404D / VM5808D's operation mode settings from the
Main Screen, use the Menu pushbutton to access the Menu page, press 8/Next
to navigate to the next page, then press pushbutton 1 to access the Operation
Mode page.
1: Operation Mode
2: Security Mode

EDID Mode

To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
24
7: Back
8: Next
8: Next
(Continues on next page.)