Operation Mode; Edid Mode - ATEN VM0808HA User Manual

VM0808HA User Manual

Operation Mode

The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM0808HA automatically apply a preset video configuration or EDID
Mode, which utilizes the best resolution across different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
To configure the VM0808HA's operation mode settings from the Main Screen,
use the Menu pushbutton to access the Menu page, press 8 or Next to navigate
to the next page, then press pushbutton 1 to access the Operation Mode page.
1: Operation Mode
2: Security Mode

EDID Mode

To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
2. Press pushbuttons 1–4 to make your selection.
1: Port 1
2: Default (In use)
24
7: Back
8: Next
8: Next
3: Remix
4: Customized