Table of Contents
Advertisement
NOTE
Just before installing the camshaft into the cylin-
der head, apply MOLY PASTE to the camshaft
journals and cam faces. Also, apply engine oil to
the camshaft housing.
MOLY PASTE
● Place each camshaft into the correct position.
● With the "T" line on the magneto rotor is aligned with the triangle mark on the crankcase, hold the camshaft
steady and lightly pull up the cam chain to remove any slack between the cam chain sprocket and exhaust
camshaft sprocket.
● The exhaust camshaft sprocket has an arrow marked "1" ① . Turn the exhaust camshaft so that the arrow is
aligned with the gasket surface of the cylinder head. Engage the cam chain with the exhaust camshaft sprocket.
● The other arrow marked "2" ②
above the arrow marked "2" ② , count out 15 roller pins (from the exhaust camshaft side going towards the
intake camshaft side).
Engage the 15th roller pin on the cam chain with the arrow marked "3" ③
following illustrations.
The cam chain should now be on all three sprockets. Be careful not to move the crankshaft until the camshaft
housing and cam chain tensioner are secured.
should now be pointing straight up. Starting from the roller pin that is directly
�
2
� 1
NOTE
15 Pins
�
3
on the intake sprocket. Refer to the
ENGINE 3-56
Hide quick links:
Advertisement
Table of Contents
