3-17 ENGINE
● Remove the gearshift shaft ①
circlip ② .
● Remove the gearshift cam stopper ③ .
● Loosen the gearshift cam plate bolt ④ .
● Remove the gearshift cam plate.
● With the crankshaft held immovable using the
special tool, remove the primary drive gear nut ⑤ ,
washer and water pump drive gear ⑥ .
Conrod holder : 09910-20115
CAUTION
The primary drive gear nut has left-hand threads.
If turning it counter-clockwise (
damage.
Pay attention at the primary drive gear nut with a
washer, and water pump drive gear with a washer.
by removing the
), it may cause
①
②
③
④
②
⑤
⑥