7-67 CHASSIS
◉ ◉ REMOVAL
● Place the vehicle on the level ground and support
the vehicle with a jack or wooden block.
▣ ▣ SPROCKET
● Remove the left rear wheel. (Refer to page 7-8)
● Remove the left rear wheel hub.
(Refer to page 7-9)
● Remove the rear caliper.
● Loosen the chain adjuster ① , rear axle housing
nuts ②
and wrench bolts ③ .
● Loosen the sprocket mounting bolts and remove
the sproket ④ .
▣ ▣ REAR AXLE SHAFT
● Remove the rear wheel. (Refer to page 7-8)
● Remove the rear wheel hub. (Refer to page 7-9)
● Loosen the axle nuts ⑤
brake.
● Remove the axle nuts.
● Remove the sprocket flange ⑥ .
● Remove the caliper.
● Draw out the rear axle shaft to the right.
by applying the rear
②
③
②
⑥
⑤
①
③
④