Table of Contents
Advertisement
◉ ◉ BRAKE / TAIL LAMP
▣ ▣ BRAKE / TAIL LAMP REPLACEMENT
This ATV's brake / tail lamp is LED(Light Emitting
Diode) type.
If any abnormal condition are found, replace the
brake / tail lamp assembly.
◉ ◉ TURN SIGNAL LAMP
CAUTION
If you touch the bulb with your bare hands, clean
the bulb with a cloth moistened with alcohol or
soapy water to prevent premature bulb failure.
▣ ▣ TURN SIGNAL LAMP BULB REPLACEMENT
● Remove the lens by removing the screw ① .
● Push the bulb, turn it to the counter-clockwise,
and pull it out.
● After stick in the new lamp, assemble the lens.
CAUTION
Overtightening the screws may cause the lens to
crack.
BRAKE / TAIL LAMP : LED type
ELECTRICAL SYSTEM 6-14
①
Hide quick links:
Advertisement
Table of Contents
