Table of Contents
Advertisement
5-15 COOLING SYSTEM
● Fix the impeller shaft with the E-ring ① .
● Fill the bearing with engine oil until engine oil
comes out from the hole of the bearing housing.
● Apply engine coolant to the O-ring ② .
● Install a new O-ring.
CAUTION
Use a new O-ring to prevent engine coolant
leakge.
● Install the rear brake master cylinder mounting
bolts.
Rear brake master cylinder mounting bolt
: 8~12 N∙ ∙ m (0.8~1.2 kgf∙ ∙ m)
● Connect the rear brake switch spring and rear
brake pedal spring as to lower side.
● Connect the water hoses.
● Pour engine coolant. (Refer to page 2-12)
● Pour engine oil. (Refer to page 2-11)
①
②
Hide quick links:
Advertisement
Table of Contents
