Connecting The Module To The Motherboard - DFI HM103-QM87 User Manual

Chapter 2 Hardware Installation
Chapter 2

Connecting the Module to the Motherboard

Note:
The system board used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The extension module requires two cables, including the LPC cable and the power cable, to
connect to the motherboard for additional COM/Parallel ports via the LPC connector. The illus-
tration of connecting the extension module to the motherboard is shown below.
the extension module connected to the motherboard via the LPC connector.
27
LPC
the LPC connector on the motherboard.
LPC
Cable
USB
Power
Cable
EXT-6C1PR
LPC
LPC
www.dfi .com