Connecting The Module To The Motherboard - DFI HM101-QM87 User Manual

Ports and Cables
Chapter 2 Hardware Installation
Chapter 2

Connecting the Module to the Motherboard

Note:
The system board used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The extension module requires two cables, including the LPC cable and the power cable, to
connect to the motherboard for additional COM/Parallel ports via the LPC connector. The illus-
tration of connecting the extension module to the motherboard is shown below.
USB
the extension module connected to the motherboard via the LPC connector.
27
LPC
the LPC connector on the motherboard.
LPC
LPC
Cable
Power
Cable
EXT-6C1PR
www.dfi .com