1. Manuals
  2. Brands
  3. DFI Manuals
  4. Motherboard
  5. HD332-H81
  6. User manual

DFI HD332-H81 User Manual

Microatx industrial motherboard
Hide thumbs Also See for HD332-H81:
Table of Contents

Advertisement

Quick Links

Download this manual
HD332-H81
MicroATX Industrial Motherboard
User's Manual
A34310548
1

Advertisement

Table of Contents
loading

Related Manuals for DFI HD332-H81

Summary of Contents for DFI HD332-H81

  • Page 1 HD332-H81 MicroATX Industrial Motherboard User’s Manual A34310548...
  • Page 2 Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules.

  • Page 3: Table Of Contents

    Table of Contents I/O Connectors ................... 23 SATA (Serial ATA) Connectors ..............23 Cooling Fan Connectors................24 Front Panel Connector ................24 Power Connectors ..................25 Copyright ......................2 Chassis Intrusion Connector ................ 25 Expansion Slots ..................26 Trademarks ......................2 Parallel Port ....................
  • Page 4 About this Manual Static Electricity Precautions An electronic file of this manual is included in the CD. To view the user’s manual in the CD, in- It is quite easy to inadvertently damage your PC, system board, components or devices even sert the CD into a CD-ROM drive.

  • Page 5: Optional Items

    About the Package The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One HD332 motherboard • One Serial ATA data cable • One I/O shield •...
  • Page 6 Chapter 1 Chapter 1 - Introduction Specifications Rear Panel I/O • 1 mini-DIN-6 port for PS/2 mouse/keyboard Processor • LGA 1150 socket for: ® • 2 DB-9 RS232 serial ports - 4th Generation Intel Core processors Ports ® • 2 VGA ports; or : Intel Core i7-4790S (8M Cache, up to 4.0 GHz);...

  • Page 7: Pci Express

    Gigabit LAN controllers, Intel 82574L Gigabit Ethernet controllers or Intel I210 ® ® ® PCI Express Gigabit Ethernet controllers (optional), support up to 1Gbps data transmission. • Audio The Realtek ALC888 audio codec provides 5.1-channel High Definition audio output. www.dfi.com Chapter 1 Introduction...
  • Page 8 Chapter 1 • Wake-On-LAN • Wake-On-PS/2 This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC. It is This function allows you to use the PS/2 keyboard or PS/2 mouse to power-on the system. supported via the onboard LAN port or via a PCI LAN card that uses the PCI PME (Power Man- agement Event) signal.

  • Page 9: Copyright

    Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules.
  • Page 10 Table of Contents I/O Connectors ...................23 SATA (Serial ATA) Connectors ..............23 Cooling Fan Connectors................24 Front Panel Connector ................24 Power Connectors ..................25 Copyright ......................2 Chassis Intrusion Connector ................ 25 Expansion Slots ..................26 Trademarks ......................2 Parallel Port ....................26 SMBus Connector ..................

  • Page 11: About This Manual

    About this Manual Static Electricity Precautions An electronic file of this manual is included in the CD. To view the user’s manual in the CD, in- It is quite easy to inadvertently damage your PC, system board, components or devices even sert the CD into a CD-ROM drive.

  • Page 12: About The Package

    About the Package The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One HD332 motherboard • One Serial ATA data cable • One I/O shield •...

  • Page 13: Chapter 1 - Introduction

    Chapter 1 Chapter 1 - Introduction Specifications Rear Panel I/O • 1 mini-DIN-6 port for PS/2 mouse/keyboard Processor • LGA 1150 socket for: ® • 2 DB-9 RS232 serial ports - 4th Generation Intel Core processors Ports ® • 2 VGA ports; or : Intel Core i7-4790S (8M Cache, up to 4.0 GHz);...

  • Page 14: Features

    Gigabit LAN controllers, Intel 82574L Gigabit Ethernet controllers or Intel I210 ® ® ® PCI Express Gigabit Ethernet controllers (optional), support up to 1Gbps data transmission. • Audio The Realtek ALC888 audio codec provides 5.1-channel High Definition audio output. www.dfi.com Chapter 1 Introduction...
  • Page 15 Chapter 1 • Wake-On-LAN • Wake-On-PS/2 This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC. It is This function allows you to use the PS/2 keyboard or PS/2 mouse to power-on the system. supported via the onboard LAN port or via a PCI LAN card that uses the PCI PME (Power Man- agement Event) signal.

  • Page 16: Chapter 2 - Hardware Installation

    Chapter 2 Chapter 2 - Hardware Installation Important: Board Layout Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in boards, and other components. Perform installation procedures at an ESD workstation only. If such a station is not available, you can provide some ESD protection by wear- System Fan ing an antistatic wrist strap and attaching it to a metal part of the system chassis.

  • Page 17: Installing The Dimm Module

    Chapter 2 The system board supports the following memory interface. Installing the DIMM Module Single Channel (SC) Note: The system board used in the following illustrations may not resemble the actual Data will be accessed in chunks of 64 bits (8B) from the memory channels. board.

  • Page 18: Cpu

    Chapter 2 6. Grasping the module by its edges, position the module above the socket with the “notch” in the module aligned with the “key” on the socket. The keying mechanism ensures the module can be plugged into the socket in only one way. The system board is equipped with a surface mount LGA 1150 socket.

  • Page 19: Installing The Cpu

    Chapter 2 Load lever Installing the CPU 5. Lifting the load lever will at the same time lift the load plate. 1. Make sure the PC and all other peripheral devices connected to it has been powered down. Lift the load lever up to 2.
  • Page 20 Chapter 2 7. Insert the CPU into the 8. Close the load plate then socket. The gold triangular push the load lever down. mark on the CPU must align with the corner of While closing the load the CPU socket shown on plate, make sure the front Retention knob edge of the load plate...

  • Page 21: Installing The Fan And Heat Sink

    Chapter 2 Installing the Fan and Heat Sink 4. Rotate each push-pin ac- cording to the direction of the arrow shown on top of The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circula- the pin.

  • Page 22: Jumper Settings

    Chapter 2 Jumper Settings PS/2 Keyboard/Mouse Power Select Clear CMOS Data JP15 1 3 5 1-3 On: +5V (default) COM 2 COM 2 COM 1 COM 1 1 3 5 3-5 On: +5V_standby 1-2 On: Normal 2-3 On: Clear CMOS Data JP15 is used to select the power of the PS/2 keyboard/mouse port.

  • Page 23: Usb Power Select

    Chapter 2 USB Power Select Power-on Select COM 2 USB 4-5 COM 1 (JP15) 1 3 5 2-4 On: +5V (default) COM 2 COM 1 USB 1-2 1-2 On: (JP5) Power-on via power button (default) JP10 USB 3-4 1 3 5 (JP6) 4-6 On: 1-2 On: +5V...

  • Page 24: Com 10 Rs232/422/485 Select

    Chapter 2 COM 10 RS232/422/485 Select 1-2 On: RS232 3-4 On: RS422 5-6 On: RS485 (default) Full Duplex JP17 and JP18 COM 2 COM 1 COM 10 JP18 1-3, 2-4 On: 3-5, 4-6 On: JP17 RS232 (default) RS422 Full Duplex/RS485 COM 10 CTS- RTS-...

  • Page 25: Com 10 Rs232/Power Select

    Chapter 2 COM 10 RS232/Power Select SATA DOM Power Select COM 2 COM 2 COM 1 COM 1 COM 10 JP14 1-3 (RI), 2-4 (DCD) On: RS232 (default) SATA 1 3-5 (+5V), 4-6 (+12V) On: JP11 RS232 with power 1-2 On: GND 2-3 On: +5V JP14 is used to configure the Serial COM port 10 to pure RS232 or RS232 with power.

  • Page 26: Rear Panel I/O Ports

    Chapter 2 Rear Panel I/O Ports PS/2 Keyboard/Mouse Port PS/2 Keyboard/Mouse COM 2 VGA 1 LAN 2 LAN 1 COM 2 COM 1 Line-in/Surround PS/2 KB/MS Line-out Mic-in/ USB 2.0 Center+Subwoofer USB 3.0 USB 3.0 COM 1 VGA 2 or DVI-I (DVI-D Signal) The rear panel I/O ports consist of the following: •...

  • Page 27: Com (Serial) Ports

    Chapter 2 COM (Serial) Ports Note: 1. HD332-H81X: 10 COM (COM 1 to COM 10). COM 3 to COM 6: RS232 HD332-H81B: 2 COM (COM 1 and COM 2). COM 7 to COM 9: 2. When COM 10 RS232/422/485 is selected, JP17 and JP18 must be set in RS232 accordance to JP2.

  • Page 28: Graphics Interfaces

    Chapter 2 Graphics Interfaces RJ45 LAN Ports The display ports consist of the following: • 2 VGA ports; or 1 VGA and 1 DVI-I ports COM 2 COM 1 VGA 1 COM 2 COM 1 LAN 2 LAN 1 LAN 2 LAN 1 VGA 2 or DVI-I (DVI-D Signal)

  • Page 29: Usb Ports

    Chapter 2 USB Ports Wake-On-USB Keyboard/Mouse The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function: USB 5 •...

  • Page 30: Audio

    Chapter 2 Audio I/O Connectors SATA (Serial ATA) Connectors Rear Audio COM 2 COM 1 COM 2 COM 1 Line-in/Surround Line-out Mic-in/ Center+Subwoofer SATA 0 SATA 1 SATA 3.0 6Gb/s (SATA port 1 provides adequate space for SATA DOM) SATA 2.0 3Gb/s Rear Audio SATA 5 SATA 4...

  • Page 31: Cooling Fan Connectors

    Chapter 2 Cooling Fan Connectors Front Panel Connector COM 2 COM 1 Speed Control Ground Power Sense CPU Fan System Fan COM 2 COM 1 RESET-SW HDD-LED Front Panel HDD-LED - HDD LED PWR-LED ATX-SW This LED will light when the hard drive is being accessed. RESET SW - Reset Switch This switch allows you to reboot without having to power off the system.

  • Page 32: Power Connectors

    Chapter 2 Power Connectors Chassis Intrusion Connector +12V Power +12V Ground Chassis COM 2 Intrusion Signal COM 1 COM 2 COM 1 Ground 12 24 +3.3V +12V ATX power +12V +5VSB PWR_OK PS_ON# +3.3V -12V +3.3V +3.3V Use a power supply that complies with the A TX12V P ower Supply Design Guide V ersion 1.1.

  • Page 33: Expansion Slots

    Chapter 2 Expansion Slots Parallel Port Parallel COM 2 COM 2 COM 1 COM 1 PCI Express x16 PCI Express x1 PCI Express x1 The 25-pin connector is used to connect an external parallel port. The parallel port connects PCI Express x16 Slot your PC to a parallel printer.

  • Page 34: Smbus Connector

    Chapter 2 SMBus Connector Standby Power LED COM 2 COM 2 COM 1 COM 1 Standby Power LED SMBus This LED will lit red when the system is in the standby mode. It indicates that there is power on the system board. Power-off the PC and then unplug the power cord prior to installing any devices.

  • Page 35: Lpc Connector

    Chapter 2 LPC Connector Battery COM 2 COM 2 COM 1 COM 1 Battery The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source of power when the main power is shut off. Safety Measures •...

  • Page 36: Chapter 3 - Bios Setup

    Chapter 3 Chapter 3 - BIOS Setup Legends Overview Keys Function The BIOS is a progr am that tak es care of the basic lev el of communication between the CPU and peripherals. It contains codes f or various advanced features found in this system board. Right and Left arrows Moves the highlight left or right to select a menu.

  • Page 37: Ami Bios Setup Utility

    Chapter 3 AMI BIOS Setup Utility Advanced The Advanced menu allows y ou to configure y our system f or basic oper ation. Some entries are Main defaults required by the system board, while others, if enabled, will impro ve the perf ormance of your system or let y ou set some f eatures according to y our preference.
  • Page 38 Chapter 3 ACPI Power Management Configuration Trusted Computing This section is used to configure the ACPI P ower Management. This section configures set tings relevant to Trusted Computing inno vations. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 39 Chapter 3 CPU Configuration SATA Configuration This section is used to configure the f unctions of Serial A TA devices. This section is used to configure the CPU . It will also displa y the detected CPU inf ormation. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 40 Chapter 3 When IDE mode is selected in the S ATA Mode Selection, it will displa y the f ollowing SATA Controller Speed information: Indicates the maximum speed that the Serial A TA controller can support. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Port 0, Port 1, Port 4 and Port 5 Advanced SATA Controller(s)
  • Page 41 Chapter 3 PCH-FW Configuration USB Configuration This section is used to configure the par ameters of Management Engine T echnology. This section is used to configure the par ameters of the USB device. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 42 Chapter 3 Super IO Configuration Serial Port 5 Configuration to Serial Port 10 Configuration This section is used to configure the I/O f unctions supported by the onboard Super I/O chip . Sets parameters of serial port 5 (COM E) to serial port 10 (COM J). Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 43 Chapter 3 Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Serial Port 7 Confi guration Serial Port 9 Confi guration Enable or Disable Serial Enable or Disable Serial Port (COM) Port (COM) [Enabled]...
  • Page 44 Chapter 3 Serial Port PC Health Status Enables or disables these serial ports (COM). This section displa ys the hardw are health monitor. Change Settings Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Selects the IO/IRQ set tings for the super I/O device. PC Health Status Smart Fan Function Setting...
  • Page 45 Chapter 3 CPU Smart Fan Control Second Super IO Configuration When this f eature is set to Automatic, the CPU’ s fan speed will rotate according to the This section is used to configure the par ameters of the system second super I/O chip . CPU’s temperature.
  • Page 46 Chapter 3 Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Serial Port 2 Confi guration Serial Port 4 Confi guration Enable or Disable Serial Enable or Disable Serial Port (COM) Port (COM) Serial Port...
  • Page 47 Chapter 3 Network Stack Ipv4 PXE Support This section is used to enable or disable UEFI network stack. When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not be created. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Ipv6 PXE Support Advanced When enabled, Ipv6 PXE boot supports.

  • Page 48: Chipset

    Chapter 3 Chipset System Agent (SA) Configuration This section is used to configure the par ameters of S ystem Agent. This section configures relev ant chipset f unctions. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset...
  • Page 49 Chapter 3 Graphics Configuration DVMT Pre-Allocated This field configures the gr aphics settings. Selects DVMT 5.0 Pre- Allocated (Fixed) Graphics Memory size used by the Internal Gr aphics Device. Please ref er to the screen shown below . Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 50 Chapter 3 LCD Control Active LVDS This field configures the L CD control. Enable or disable the L VDS unction. When enabled, y ou can select the L CD panel t ype. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 51 Chapter 3 NB PCIe Configuration Memory Configuration This field is used to configure the set tings of NB PCI Express. This field only displa ys the memory configur ation. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Chipset NB PCIe Confi...
  • Page 52 Chapter 3 PCH-IO Configuration PCI Express Configuration This section illustr ates the PCH par ameters. This field is used to configure the PCI Express set tings. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Chipset Intel PCH RC Version...
  • Page 53 Chapter 3 XHCI Mode USB Configuration This field is used to configure the USB set tings. Selects the oper ation mode of XHCI controller . These options are Auto , Enabled, and Disabled. When Disabled is selected in the XHCI Mode, it will displa y the f ollowing inf ormation: Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 54 Chapter 3 USB Ports Per-Port Disable Control PCH Azalia Configuration This field is used to control each of the USB ports(0~13) disabling. When enabled, This field is used to configure the PCH Azalia set tings. it will displa y the f ollowing information: Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

  • Page 55: Boot

    Chapter 3 Boot CSM Parameters Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Main Advanced Chipset Boot Security Save & Exit Boot Confi...

  • Page 56: Security

    Chapter 3 Security Save & Exit Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Main Advanced Chipset Boot Security Save & Exit Password Description Set Administrator Save Changes and Reset...

  • Page 57: Updating The Bios

    Chapter 3 Updating the BIOS Notice: BIOS SPI ROM To update the BIOS , you will need the new BIOS file and a flash utilit y, AFUDOS. 1. The Intel Management Engine has already been integr ated into this system board. Due to ®...

  • Page 58: Chapter 4 - Supported Software

    Chapter 4 Chapter 4 - Supported Software For Windows 7 The CD that came with the system board contains driv ers, utilities and softw are applications required to enhance the perf ormance of the system board. Insert the CD into a CD-ROM driv e. The autorun screen (Mainboard Utilit y CD) will appear. If after inserting the CD , “Autorun”...
  • Page 59 Chapter 4 For Windows XP Microsoft Framework 3.5 (For Windows XP) Note: Before installing Microsoft Fr amework 3.5, mak e sure y ou have updated y our Windows XP oper ating system to Service P ack 3. To install the driv er, click “Microsoft Fr amework 3.5” on the main menu. 1.

  • Page 60: Intel Chipset Software Installation Utility

    Chapter 4 Intel Chipset Software Installation Utility 3. Click Exit. The Intel Chipset Softw are Installation Utilit y is used f or updating Windows INF files so that ® the Intel chipset can be recognized and configured properly in the system. To install the utilit y, click “Intel Chipset Softw are Installation Utilit y”...
  • Page 61 Chapter 4 Microsoft DirectX 9.0C (For Windows XP) 3. Go through the readme document for more installa- tion tips then click Next. To install the utilit y, click “Microsoft DirectX 9.0C Driv er” on the main menu. 1. Click “I accept the agreement”...
  • Page 62 Chapter 4 Intel HD Graphics Drivers (For Windows XP) 4. Setup is now installing the driver. Click Next to continue. To install the driv er, click “Intel HD Gr aphics Drivers” on the main menu. 1. To start installation, click Next.
  • Page 63 Chapter 4 Intel HD Graphics Drivers (For Windows 7 and Windows 8) 3. Go through the readme document for system re- quirements and installation To install the driv er, click “Intel HD Gr aphics Drivers” on the main menu. tips then click Next. 1.

  • Page 64: Intel Management Engine Drivers

    Chapter 4 Intel Management Engine Drivers 3. Setup is currently installing the driver. After installation (For Windows 7 and Windows 8) has completed, click Next. To install the driv er, click “Intel Management Engine Driv ers” on the main menu. 1.

  • Page 65: Audio Drivers

    To install the driv er, click “Audio Drivers” on the main menu. The LAN drivers for Windows XP supporting on the HD332-H81 system board has to be installed manually. When y ou want to install the L AN driver for Windows XP, please f ollow the steps below to accomplish the installation.
  • Page 66 Chapter 4 3. Choose the option "Don't 6. Insert the installation disk search. I will choose the and make sure the selected driver to install" in order to drive is correct. select the device driv er from a list, and click "Next." (For 32-bit, the f le name is “e1d5132.inf”.) 4.
  • Page 67 Chapter 4 Intel LAN Drivers (For Windows 7 and Windows 8) 9. Click "Finish" to close the wizard. To install the driv er, click “Intel L AN Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 10.

  • Page 68: Dfi Utility

    DFI Utility 4. Click Install to begin the installation. DFI Utility provides information about the board, W atchdog,and DIO. To access the utilit y, click “DFI Utility” on the main menu. Note: If you are using Windows 7 , you need to access the oper ating system as an administrator to be able to install the utilit y.
  • Page 69 Chapter 4 3. Click “Install” to begin the The DFI Utilit y icon will appear on the desktop . Double-click the icon to open the utilit y. installation. 4. After completing installa tion, click “Finish” . Information HW Health Chapter 4 Supported Softw are...
  • Page 70 Chapter 4 Intel USB 3.0 Drivers (For Windows 7 Only) To install the driv er, click “Intel USB 3.0 Driv er” on the main menu. 1. Setup is ready to install the driv er. Click Next. HW Health Set 2. Read the license agreement then click Yes.
  • Page 71 Chapter 4 RENESAS USB 3.0 Driver 3. Go through the readme docu- ment for more installation tips then click Next. To install the driv er, click “RENES AS USB 3.0 Driv er” on the main menu. 1. The setup progr am is now ready to install the utilit y.

  • Page 72: Intel Rapid Storage Technology

    Chapter 4 Intel Rapid Storage Technology 4. Click “Finish“ to exit the wizard after the setup progr am is (For Windows 7 and Windows 8) installed successfully. The Intel R apid Storage Technology is a utilit y that allows y ou to monitor the current status of the S ATA drives.
  • Page 73 Chapter 4 3. Read the license agreement then 6. Click “Yes, I w ant to restart m y click Yes. computer now” then click Finish. Restarting the system will allow the new software installation to tak e effect. 4. Go through the readme document for system requirements and instal- lation tips then click Next.
  • Page 74 Chapter 4 Nuvton-SIO 4. Installing status. To install the driv er, click “Nuvton- SIO” on the main menu. 1. The setup progr am is preparing to install the driv er. 5. Click “Finish“ to exit the wizard after the installation is completed. 2.
  • Page 75 Chapter 4 Infineon TPM Driver and Tool (optional) 4. Enter the necessary inf ormation and then click Next. To install the driv er, click “Infineon TPM driv er and tool (option)” on the main menu. 1. The setup progr am is preparing to install the driv er.
  • Page 76 Chapter 4 7. TPM requires installing the Micro- 10. Click “Yes“ to restart y our system. soft Visual C++ package prior to installing the utilit y. Click Install. 8. The setup progr am is currently installing the Microsoft Visual C++ package. 9.

  • Page 77: Adobe Acrobat Reader

    Chapter 4 Adobe Acrobat Reader 9.3 To install the reader, click “Adobe Acrobat R eader 9.3” on the main menu. 1. Click Next to install or click Change Destination F older to select another f older. 2. Click Install to begin installa- tion.

  • Page 78: Chapter 5 - Digital I/O Programming Guide

    Chapter 5 Chapter 5 - Digital I/O Programming Guide The Configuration Register (register 3) configures the direction of the I/O pins. If a bit in this register is set to 1, the corresponding port pin is enabled as an input with a high-impedence Register Description output driver.

  • Page 79: Sample Code

    Chapter 5 Function Description GPIO Output Process I2CWriteByte(SlaveAddr, SubAddr, Data): 0x42 #def ne SLAVE_ADDR Write a Byte data to a specified I2C Device. 0x00 #def ne INPUT_PORT 0x01 #def ne OUTPUT_PORT I2CReadByte(SlaveAddr, SubAddr, *Data): #def ne INVERSION_PORT 0x02 Read a Byte data from a specified I2C Device. #def ne COMFIG_PORT 0x03 GpioOut(int PinNum, int Level)

  • Page 80: Appendix A - Watchdog Sample Code

    Appendix A Appendix A - Watchdog Sample Code ;Software programming example: ;--------------------------------------------- ;(1) Enter Super IO Con f guration mode ;--------------------------------------------- DX,4EH AL,87H DX,AL DX,AL ;------------------------------------------------------------------------------------------- ;(2) Con f guration Logical Device 8, register CRF0/CRF1 (WD T Control/WD T timer) ;------------------------------------------------------------------------------------------- MOV DX,4EH AL,07H...

  • Page 81: Appendix B - Troubleshooting

    Appendix B Appendix B - Troubleshooting Checklist The picture seems to be constantly moving. Troubleshooting Checklist 1. The monitor has lost its v ertical sync. Adjust the monitor ’s vertical sync. 2. Move away any objects, such as another monitor or f an, that ma y be creating a magnetic This chapter of the manual is designed to help y ou with problems that y ou may encounter field around the displa y.

  • Page 82: Hard Drive

    Appendix B Hard Drive System Board 1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card is Hard disk failure. loose, power of f the system, re-install the card and power up the system. 1.

Table of Contents