Rj45 Lan Ports; Usb Ports - DFI HM103-QM87 User Manual

RJ45 LAN Ports

LAN 1 LAN 2
LAN 1
LAN 2
Features
• Intel
® I210 PCI Express Gigabit Ethernet controller
• Intel
® I217LM with iAMT9.0 Gigabit Ethernet Phy (HM103-QM87)
• Intel ® I217LM Gigabit Ethernet Phy (HM103-HM86)
The two LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Chipset menu ("PCH-IO Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2

USB Ports

USB 1
USB 0
USB 3.0
USB 3
USB 2
USB 2.0
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with two onboard USB 3.0 ports (USB 0-1) and six onboard USB
2.0/1.1 ports (USB 2-3/8-9/10-11). The 10-pin connectors allow you to connect 4 additional
USB 2.0/1.1 ports (USB 8-9/10-11). The additional USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to an available slot at the rear of the system chassis and
then insert the USB port cables to a connector.
BIOS Setting
Configure these onboard USB devices in the Advanced menu ("USB Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your system operation to use the USB device. Re-
fer to your operating system's manual or documentation for more information.
19
USB 10-11
USB 8-9
10
2
USB 2.0
1
9
www.dfi.com