DFI HM103-QM87 User Manual page 39

Smart Fan Mode Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Smart Fan Mode Confi guration
CPU Fan Mode [Thermal CruiseTM Mode]
55
CPU Fan Target Temp
CPU Fan Tolerance 3
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
CPU Fan Mode
Selects the CPU Fan Mode.
CPU Fan Target Temp
The CPU's target temperature will vary according to the CPU Fan Mode.
CPU Fan Tolerance
The tolerance value of the CPU's temperature will vary according to the CPU Fan
Mode.
Chapter 3 BIOS Setup
Chapter 3
NCT6102D Super IO Features
This section configures the support of some control functions.
Smart Fan Mode Select

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
39
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
NCT6102D Super IO Features
[Aloways Off]
Power-Loss State
[Disabled]
Case Open Warning
[Second]
WatchDog Count Mode
0
WatchDog Timeout Value
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Power-Loss State
Controls the status when the power loss occurs.
Always Off
When power returns after an AC power failure, the system's power is off. You
press the Power button to power-on the system.
Always On
When power returns after an AC power failure, the system will automatically power-on.
Keep Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system's power is off when AC
power failure occurs, it will remain off when power returns. If the system's power is on
when AC power failure occurs, the system will power-on when power returns.
Cae Open Warning
Enables or disables case open warning function.
WatchDog Count Mode
Selects the watchdog count mode: second or minute.
WatchDog Timeout Value
Sets the timeout value of the super IO watchdog timer. 0 means disabled.
Control the status when
power loss occurs.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
must
www.dfi .com