Rear Panel I/O Ports
LAN 1
COM 2
LAN 2
USB 3.0
USB 2.0
DC-in
COM 1
The rear panel I/O ports consist of the following:
• 1 19~24V DC-in jack
• 2 Serial COM ports
• 1 HDMI port
• 1 DVI-I port
• 2 RJ45 LAN ports
• 2 USB 2.0 ports
• 2 USB 3.0 ports
• Line-in jack
• Line-out jack
• Mic-in jack
Chapter 2 Hardware Installation
Chapter 2
DVI-I
Line-in
Line-out
Mic-in
HDMI
17
19~24V DC-in
DC-in
This jack provides maximum of 100W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter with 12V DC output voltage. Using a volt-
age higher than the recommended one may fail to boot the system or cause damage to the
system board.
www.dfi.com