Technical Specifications; Maintenance; Disposal (Environmental Protection) - Topcom BD-4601 User Manual

Hide thumbs Also See for BD-4601:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
BD-4601 (BPM Arm 1500)
14

Technical specifications

Model
Power source
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage/transportation
environment
Weight
Cuff Arm circumference
Limited patient
Classification
15

Maintenance

Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it immediately
with a dry cloth.
Do not use detergent or any strong chemicals to clean the device.
Use only a dry cloth to wipe the cuff.
If the device is not to be used for a long time, please remove the batteries from the device
(leaking of battery acid can cause the device to malfunction).
Do not twist the cuff.
Do not drop the product and avoid any strong impacts.
Do not attempt to disassemble or change any parts of the monitor, including arm cuff, due to
substitution of a component different from that supplied might result in measurement error.
Always store the unit in the pouch after use.
Do not place the device directly under sunlight, in high temperature, or in humid or dusty places.
Do not store the device in extremely low (less than -25°C/-13°F) or high (more than 70°C/158°F)
temperature.
16

Disposal (environmental protection)

Dispose of the device in accordance with EC Directive 2002/96/EC-WEEE (Waste
Electrical and Electronic Equipment). If you have any queries, please contact your local
body responsible for waste disposal.
Batteries should be disposed of in an environmentally friendly manner in accordance with
local regulations.
12
BD-4601 (BPM Arm 1500)
4 x AAA (1,5V) - Alkaline batteries
Pressure: 0~300 mmHg
Pulse: 40~199 beats/minute
Pressure: ±3 mmHg
Pulse: within ±5% of reading
Semi-conductor
Automatic - Pump driven
Automatic Pressure release valve
3 Memory zones for each 40 memories
1 minute after last key operation
+5°C~+40°C (41°F ~ 104°F)- Humidity 15% ~ 93% R.H.
-25°C ~ 70°C (-13°F ~ 158°F) Humidity ≤ 93% R.H.
212g (with batteries)
23~33 cm (9~13 inch)
Over 18 years old
Internally powered equipment
Classification of type BF(applied part)
IPX0
Not suitable for use in presence of flammable anaesthetic mixture
with air or with oxygen or nitrous oxide
Continuous operation with short-time loading

Advertisement

Table of Contents
loading

Table of Contents