Technical Specifications - Topcom BPM Wrist 7500 User Manual

To erase all data from one memory zone:
• Press the START/STOP button to activate the display.
• Press the UP or DOWN button to select the desired
memory zone.
• Press the MEMORY button to see the average of all
measurement results.
• Press the MODE and the DOWN button simultaneously to
erase all data from the selected memory zone.

15 Technical specifications

Power source
Measurement method
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage environment
Weight
Wrist circumference
Limited patient
Dimensions
K.B.
Classification
*Specifications are subject to change without notice.
The CE symbol indicates that the unit complies with the
essential requirements of the directive 93/42/EEC.
3V DC: Two LR03 (AAA) Non rechargeable batteries
Oscillometric
Pressure: 0 ~ 300 mmHg
Pulse: 40 ~ 199 beats/minute
Pressure: ± 3 mmHg
Pulse: within ± 5% of reading
Semi-conductor
Pump driven
Automatic Pressure release valve
3 Memory zones for each 40 memories
1 minute after last key operation
+10°C ~ + 40°C
≤
85% RH
-20°C ~ + 70°C
≤
85% RH
148g (including batteries)
135 ~ 195 mm
Over 18 years old
74(L) x 84(W) x 32(H) mm
Short time operation 2 minutes
• Internally powered equipment
• Classification of type BF (applied part)
• IPX0
• Not suitable for use in presence of flammable anaes-
thetic mixture with air or with oxygen or nitrous oxide
• Continuous operation with short-time loading
TOPCOM BPM Wrist 7500
11