Omron EJ1 User Manual page 51

Unit Configuration Examples
Note
Connecting the G3ZA and
EJ1
Note
30
Wire the connections indicated with dotted lines when settings for all EJ1
Controllers are being made from one port A connector. If the connections indi-
cated with dotted lines are not wired, the settings for group A can be made
only using the port A connector for group A and the settings for group B can
be made only using the port A connector for group B.
• Up to 8 G3ZA Power Controllers can be connected to one TC4/TC2 Unit.
Either turn ON power to the G3ZA first, or turn ON power to the G3ZA and
EJ1 simultaneously.
EJ1@-TC4
EJ1@-EDU
or
EJ1@-TC2
G3ZA
Up to 8 G3ZA Power Controllers can be
connected to one TC Unit.
Section 2-4