Omron EJ1 User Manual page 232

Status Lists
Configuration Error A Status
Bit position Status
Bit 0 Undefined Expand Units No error
Bit 1 Not used.
Bit 2 Too Many Expand units
Bit 3 Expand Unit Failure
Bit 4 Expand Unit Connec-
tion Fault
Bit 5 Not used.
Bit 6 Not used.
Bit 7 Not used.
Bit 8 Not used.
Bit 9 Not used.
Bit 10 Not used.
Bit 11 Not used.
Bit 12 Not used.
Bit 13 Not used.
Bit 14 Not used.
Bit 15 Not used.
Configuration Error B Status
Bit position Status
Bit 0 Expand Unit 1 Error
Bit 1 Expand Unit 2 Error
Bit 2 Expand Unit 3 Error
Bit 3 Expand Unit 4 Error
Bit 4 Expand Unit 5 Error
Bit 5 Expand Unit 6 Error
Bit 6 Expand Unit 7 Error
Bit 7 Expand Unit 8 Error
Bit 8 Not used.
Bit 9 Not used.
Bit 10 Not used.
Bit 11 Not used.
Bit 12 Not used.
Bit 13 Not used.
Bit 14 Not used.
Bit 15 Not used.
Bit description
0 1
Error
No error Error
No error Error
No error Error
Bit description
0 1
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
Meaning
A Unit that is not recognized is connected.
More than 9 G3ZA Units are connected.
There is an error in communications with the G3ZA.
A communications response has not been received
from a G3ZA after it was registered in the configura-
tion.
Meaning
There is an error in communications with the
G3ZA1.
There is an error in communications with the
G3ZA2.
There is an error in communications with the
G3ZA3.
There is an error in communications with the
G3ZA4.
There is an error in communications with the
G3ZA5.
There is an error in communications with the
G3ZA6.
There is an error in communications with the
G3ZA7.
There is an error in communications with the
G3ZA8.
Appendix
C4/84 0002
C4/84 0003
211