Omron EJ1 User Manual page 161

Other HFU Functions
Outputs the ON/OFF status
of the event input.
EV1
CPU CPU
BUS1
BUS2
BUS3
HFU TC2
Outputs the ON/OFF status
of the event input.
EV1 EV2
CPU CPU
BUS1
BUS2
BUS3
HFU TC4
140
• Temperature Controller Error
The Temperature Controller Error output will turn ON when any bit between
bit 0 and bit 13 is ON in the Device A Status. It can be used to output EJ1
error status. Refer Status Lists on page 209 for details on Device A Status.
Example
Example 1: Switch all channels between Run and Stop according to the ON/
OFF status of the event input.
Switches between Run/Stop based
on the bus ON/OFF status.
CPU
TC4 EDU
Example 2: Switch all channel banks, according to the ON/OFF status of the
event input.
Switches banks based on
the bus ON/OFF status.
CPU
TC4 EDU
Note When assigning bus I/O, disable all bus I/O assignments first and
then make the settings.
Model Parameter name
HFU Bus Output 3 Assignment Event input 1
TC2 Bus Input 3 Assignment
TC4 Bus Input 3 Assignment
Model Parameter name
HFU Bus Output 1 Assignment Event input 1
Bus Output 2 Assignment Event input 2
TC4 Bus Input 1 Assignment
Bus Input 2 Assignment
Bus Output 1 Assignment Disabled
Bus Output 2 Assignment Disabled
Section 5-2
Set Value
All channels Run (0)/Stop
(1)
All channels Run (0)/Stop
(1)
Set Value
Bank for all channels (bit 0)
Bank for all channels (bit 1)