Omron EJ1 User Manual page 182

Detailed Description of Services
Response code Error name
7014 Operation error
(7014)
7015 Operation error
(7015)
7016 Operation error
(7016)
7020 Operation error
(7020)
7021 Operation error
(7021)
7030 Operation error
(7030)
7041 Operation error
(7041)
7042 Operation error
(7042)
0000 Normal completion
Cause
The command cannot be executed because
EEPROM is currently being written.
Execute retries until the 7014 response code
is reset.
The command cannot be executed during
reset (including startup).
The command cannot be executed during
error latch status.
The command cannot be executed in the cur-
rent control mode.
The command cannot be executed because
the control switching conditions have not
been established.
The command cannot be executed in the cur-
rent output mode.
The command cannot be executed in manual
operation mode.
The command cannot be executed in tuning
mode.
Processing was completed normally.
Section 6-4
161