Diagnosing Image Problems; Resolving The Pixel Failure Problems - Fargo DTC300 User Manual

RESTRICTED USE ONLY

Diagnosing Image Problems

Resolving the Pixel Failure problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: A thin line or scratch travels the entire length of the card (See
sample image below).

Printer Error State: None

LCD Error Display: None

Driver Monitor Error Display: None
2 Check the card stock for scratches. Replace the cards (as needed).
3 Examine the Printhead for visible damage.
4 Clean the Printhead. See the
5 Replace the Printhead if the problem persists. See
Assembly (D900023).
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
Cleaning the Printhead
Fargo Electronics, Inc.
procedure.
Replacing the Printhead
4-41