Resolving The Incomplete Resin Printing Problems - Fargo DTC300 User Manual

RESTRICTED USE ONLY

Resolving the Incomplete Resin Printing problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Black resin text and barcodes appear faded or too light.

Printer Error State: None

LCD Error Display: None

Driver Monitor Error Display: None
2 Increase the Resin Heat setting within the Image Color tab of the Printer
Driver. See the
3 Increase the Image Darkness. See the
procedure.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
Using the Image Color tab
Fargo Electronics, Inc.
(DTC300/DTC300M).
Using the Image Darkness Option
4-49