Resolving The Incomplete Resin Printing Problems - Fargo HDP600-LC CR100 User Manual

RESTRICTED USE ONLY

Resolving the Incomplete Resin Printing problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
•
Symptom: Black resin text and barcodes appear faded or too light.
See Display A below.
•
Printer Error State: None
•
LCD Error Display: None
•
Driver Monitor Error Display: None
2 Increase the Resin Heat setting within the Image Color tab of the Printer
Driver. See Display B below.
3 Increase the Image Darkness. See the
procedure.
Display A – See Procedural Step 1
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
Fargo Electronics, Inc.
Adjusting the Image Darkness
4-87