Turning Off The Oscilloscope; Cleaning The Oscilloscope - Keysight Technologies Z Series User Manual

1
Setting Up the Oscilloscope

Turning Off the Oscilloscope

1

Cleaning the Oscilloscope

Clean the oscilloscope with a soft cloth dampened with a mild soap and water
solution.
Do not use too much liquid in cleaning the oscilloscope. Water can enter the Infiniium
CAUTION
panels, damaging sensitive electronic components.
24
Press the power switch at the lower left corner of the oscilloscope front panel.
The oscilloscope will go through a normal Windows operating system
shutdown process.
Infiniium Z-Series Oscilloscopes User's Guide