FarmTek PolyMax 108293 Quick Start Manual page 7

GREENHOUSE BENCH KITS
4
ATTENTION: The following steps explain the assembly of the legs of the complete Bench System
(#108293S). If you have not ordered the complete Bench System and have only the 108293 bench top,
continue with Step 8.
Gather four (4) one-way plates (104624).
Measure and mark a line 6-1/2" from each corner edge on the 96" tubes.
Position the edge of a one-way plate on this line and attach to the 96" tube using Tek screws on each side
of the plate.
Repeat for the remaining corners.
Tek screws
6-1/2"
Edge-to-edge
Revision date: 10.26.21 7