Table of Contents
Advertisement
4.6 Low pressure
At an abnormally low air pressure in the mattress, the LED lights on the symbol . The lamp
goes out when the pressure returned to normal.
Please refer to chapter 8 for troubleshooting.
WARNING!
If the air pressure remains low, check the mattress and tubes for damage. Repair as
necessary or contact Care of Sweden or one of its authorised repair technicians.
4.7 Transport function
If the patient must be moved in bed, the tubes can be connected
together (detached from the pump) and the mattress put in
"transport mode". This mode should only be used for short periods
of time.
4.8 Heel function (with check valves, option)
This feature allows pressure relief of the heels. Disconnect the
air cell which is directly under the heel. This air cell will then be
emptied for air. Press the bottom (1) and disconnect the plug.
Let the cell remain in its place in the mattress. The air cell is
activated by assembling the connection again.
5 Cleaning and reconditioning
It is important to follow the instructions below before using the product for another user.
Consult the hygiene responsible or the supplier for help and instructions when unsure.
5.1 Cleaning
PUMP
WARNING!
Do not open the pump housing – risk of electric shock. Service and maintenance must be
performed by authorised technicians. Do not get the pump wet or submerge it in any
liquid.
Wipe of the pump with a damp cloth and a mild cleaning solution for this purpose such
as: alcohol with or without tensides, Isopropanol 70 %, oxidating solutions or chlorine
1
10
Advertisement
Table of Contents
