Care of Sweden CuroCell Nova CX13 User Manual page 11

Alternating pressure system
Table of Contents

Advertisement

max 1 %. If using a different agent, choose one that does not affect the plastic of the pump 
housing. 
 
MATTRESS COVER 
 
Covers can be wiped off with a mild cleaning solution for this purpose such as: alcohol 
with or without tensides, Isopropanol 70 %, oxidating solutions or chlorine max 1 %. 
Excrements and blood spots must be removed immediately with cold water.
follow local instructions and usage instructions for the cleaner. 
 
Multi‐layer covers should be divided before washing. Wash with like colors. 
 
Chlorine and phenol‐based cleaners could have a negative impact on the PU surface 
and should be avoided. If chlorine is used, we recommend a mixture of max. 1%. 
 
INNER COVER AND DISTANCE FABRIC (accessories) 
 
 
 
Clean the affected area with a mild cleaning solution for this purpose such as:
without tensides, Isopropanol 70 %, oxidating solutions or chlorine max 1 %. 
 
5.2 Reconditioning
 
PUMP 
See section 5.1 for instructions. 
 
MATTRESS 
1. Disconnect the tubes and let the air out, also open the CPR valve.  
 
2. Remove the cover. See instructions in chapter 5.1 for cleaning covers. If the product is 
equipped with a foam core this should be removed and cleaned separately. 
 
3. Move the mattress to a clean area, which is suitable for cleaning. 
 
4. Wipe off the cells, all tubes and the CPR valve with a mild cleaning solution for this purpose 
such as: alcohol with or without tensides, Isopropanol 70 %, oxidating solutions or chlorine 
max 1 %. 
 
5. Wipe off and disinfect all the work surfaces with an alcohol‐based cleaning agent intended 
for this purpose. 
 
6. Put the mattress together. If cells for any reason have loosened from the tubes, these must 
be replaced according to drawing in chapter 2.1. 
 
FOAM CORE 
 
Clean the affected area with a mild cleaning solution for this purpose such as: alcohol 
with or without tensides, Isopropanol 70%, oxidating solutions or chlorine max 1 %. 
 
Press out the water carefully. Let the foam core dry in a warm, ventilated area, without direct 
exposure of sunlight. The foam core needs to be completely dry before it is used again.  
 
 
 
 
11 
 
Carefully 
 
alcohol with or 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Curocell nova cx19

Table of Contents