We would be very grateful for all information involving accidents or incidents relating to our products, by reporting them immediately to us, here at Care of Sweden.
For details of the standard sizes available. See paragraph 2.2. For other sizes, please contact Care of Sweden or your local dealer. 2.1 Covers All covers are easy to manage and care for, and conform to stringent requirements in respect of cleaning and hygiene.
Page 5
2.2 Product descriptions Helab seat cushions are characterised by a high level of comfort and good functionality. They are easy to clean and, with their rounded rear edges and recesses to accommodate wheelchair back supports, they deliver an excellent fit. Markings on the cushions make them easy to position.
Page 6
Contur A pressure redistributing seat cushion, constructed from an anatomically moulded polyurethane foam base with viscose elastic foam on the underside. Classification: ISO code 18 10 06 (pressure redistributing) Material in cushion: Polyurethane foam, viscose elastic foam, vulcanised rubber Height: 5 cm Warranty: 2 years Fire: SS-EN 1021-1, SS-EN 1021-2, ISO 7176-16 Item information Contur, including Standard cover:...
Page 7
Plantur A pressure redistributing seat cushion, constructed from anatomically moulded polyurethane foam with a flat top side and a viscose elastic foam insert in the underside. Classification: ISO code 18 10 06 (pressure redistributing) Material in cushion: Polyurethane foam, viscose elastic foam, vulcanised rubber Height: 5 cm Warranty: 2 years Fire: EN 1021-1, EN 1021-2, ISO 7176-16...
Page 8
Consept EX A pressure redistributing cushion, constructed from an anatomically moulded polyurethane foam base with viscose elastic foam the topside. Classification: ISO code 18 10 06 (pressure redistributing) Material in cushion: Polyurethane foam, elastic foam Height: 5 cm Warranty: 2 years Fire: EN 1021-1, EN 1021-2, ISO 7176-16 Item information Consept EX, including Standard cover: Size...
Page 9
Hemi Hemi is a specially-designed seat cushion with a protected design (Reg.no. 79436) and suitable for people who need to be able to propel themselves in their wheelchair using their legs. Three versions are available - left, right and double. Classification: ISO code 18 10 06 (pressure redistributing) Material in cushion: Polyurethane foam, viscose elastic foam, vulcanised rubber Height: 5 cm...
Page 10
Tremix An anatomically-designed seat cushion constructed in multiple layers and used to prevent pressure ulcers. Classification: ISO code 04 33 03 (pressure relief) Material in cushion: Polyurethane foam, viscose elastic foam, vulcanised rubber Height: 7 cm Warranty: 2 years Fire: EN 1021-1, EN 1021-2, ISO 7176-16 Item information Tremix, including Delux cover: Size Rec.
585550-20 55x50x2,5 cm Other sizes? Do you request other sizes please contact Care of Sweden or your local dealer. 3 Use When unpacking, check to ensure that the item is not damaged. Remove the plastic bag and any protective material. Avoid using a knife as this risks damaging the product.
Levelling Plate (without anti-slip) Place the plate inside the cover, under the cushion, with the rounded rear edge facing backwards and the bevelled underside facing down against the underside of the cover. The plate is also labelled as to how it should be placed. Seat cushion Seat frame Levelling plate...
CUSHION - All cushions (except Consil and Levelling plate) Clean the affect area with a mild cleaning solution for this purpose such as: alcohol with or without tensides, Isopropanol 70%, oxidating solutions or chlorine max 1 %. Let the foam core dry in a warm, ventilated area, without direct exposure of sunlight. The foam core needs to be completely dry before it is used again.
Page 14
5.7 Returns and complaints Complaints must be referred to Care of Sweden or the local dealer. Products are to be returned in accordance with our instructions and may only be returned once a complaint has been submitted to Care of Sweden or the local dealer.
6 Accessories A range of accessories is available for these cushions. These are listed below. Levelling plate If you need to level out the seat cushion, an insert plate is available that can be placed inside the cover against the underside of the cushion. See page 11-12 for more information. Cover Hygienic cover (Consil) 80xxyy-01*...