Panasonic MINAS S Series Operating Manual page 145

Optional Parts
Connector Kits for Power Source for Amplifier
1) Part No. DV0P2870
2) Components
Item
Connector (10-pin)
Connector pin
3) Pin alignment of the connector for CN POWER connector
4) Recommended manual
and Wiring" (page 22).
3 . Never connect anything to the pins where (NC) is written on the table above.
Connector Kits for Motor and Encoder
• Used for: MUMS 30W to 750Wwith a 2500-
1) Part No. DVOP2900
Components
press fitting tools (Custom-
ers are requested to
prepare these tools for
themselves.)
< Notes >
1 .The table above shows the pins alignment, looking from the terminal inserted
direction of the receptacle. Make sure of the pin numbers marked on the
plug itself for actual connection so that wiring is done correctly.
2 .For wiring and connection, refer to "Main circuits" in "System Configuration
Item
Manufacturer's Quantity
Part No.
5 5 5 7 - 1 0 R - 2 1
0
5 5 5 6 P B T L
2)
10 9
L1 ( NC )
5 4
P ( NC )
Manufacturer's Part No.
- App.48 -
Manufacturer
1 Molex
Incorporated
4
pulse,
11-wire incremental encoder
8 7 6
L2 ( NC ) L3
3 2 1
B ( NC ) E
Quantity Manufacturer
Remarks
POWER connector
(10-pin)
Remarks