Table of Contents
Advertisement
Details of Parameters
Default setting is shown by [ ].
Function
or other similar motion, overtraveling of
se mechanical damages. To avoid this,
provide limit switches at each end so
er the limit switch position can be
Work
n
CCW direction
Limit
Limit
switch
switch
CCWL
CWL
ection
Operation
M-
Normal with the CCW limit
switch not activated
Traveling in CCW
direction inhibited
Normal with the CW limit
switch not activated
Traveling in CW direction
inhibited
and CWL inputs are disabled, and
CW and CCW directions are allowed.
and CCW/CW off (not connected to
ifier will stop the motor with "overtravel
assuming that traveling over the limit
e CCW and CW directions.
fy whether or not to use the dynamic
celeration after CCW or CW overtravel
L or CWL) becomes active. For details,
on of Pr66 (DB inhibition at overtravel
Amplifier
- App.22 -
Advertisement
Table of Contents
