Extreme Networks BlackDiamond 6800 User Manual page 48

A T S
CCESSING HE YSTEM
R D
ESETTING AND
To reset and disable SNMP settings, use the commands in
Table 2-8: SNMP Reset and Disable Commands
Command
disable snmp access
disable snmp trap
unconfig management
C B
HECKING ASIC
The BlackDiamond offers the following commands for checking basic connectivity:
•
ping
•
traceroute
P
ING
The command enables you to send Internet Control Message Protocol (ICMP) echo
ping
messages to a remote IP device. The
administrator privilege level.
The command syntax is
ping
ping {continuous} {size <n>} <ip_address>
Options for the ping command are described in
Table 2-9: Ping Command Parameters
Parameter Description
Specifies ICMP echo messages to be sent continuously.
continuous
This option can be interrupted by pressing any key.
Specifies the size of the packet.
size <n>
If a request fails, the system continues to send
ping
Press any key to interrupt a
2-22
SNMP
ISABLING
Description
Disables SNMP on the system.
Prevents SNMP traps from being sent from the system.
Does not clear the SNMP trap receivers that have been
configured.
Restores default values to all SNMP-related entries.
C
ONNECTIVITY
command is available for both the user and
ping
request.
ping
Table 2-8.
Table 2-9.
messages until interrupted.
ping
B D U G
LACK IAMOND SER UIDE