Rmon - Extreme Networks BlackDiamond 6800 User Manual

S M S
TATUS ONITORING AND TATISTICS
Table 11-5: Logging Commands (continued)
Command
show log {<priority>} {<subsystem>}
show log config
clear counters
clear log {static}

RMON

Using the Remote Monitoring (RMON) capabilities of the BlackDiamond allows
network administrators to improve system efficiency and reduce the load on the
network.
The following sections explain more about the RMON concept and the RMON features
supported by the BlackDiamond.
You can only use the RMON features of the system if you have an RMON
management application.
11-16
Description
Displays the current snapshot of the log.
Options include:
priority — Filters the log to display
message with the selected priority or higher
(more critical). Priorities include critical,
warning, and informational. If not specified,
informational priority messages and higher
are displayed.
subsystem — Filters the log to display
messages associated with the selected
switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
Displays the log configuration, including the
syslog host IP address, the priority level of
messages being logged locally, and the priority
level of messages being sent to the syslog
host.
Clears all switch statistics and port counters.
Clears the log. If static is specified, the
critical log messages are also cleared.
B D U G
LACK IAMOND SER UIDE