Sample Ingress Mode Qos Configuration - Extreme Networks BlackDiamond 6800 User Manual

Table 7-4: QoS Configuration Commands (continued)
Command
config qosprofile <qosname> {minbw <percent>}
{maxbw <percent>} {priority <level>}
config port <slot:portlist> qosprofile <qosname>
config vlan <name> qosprofile <qosname>
disable pace
S
AMPLE
The following ingress mode example modifies an existing QoS profile and applies it to a
VLAN traffic grouping. The priority parameter, although required, is ignored when
configuring a default QoS profile in ingress mode.
config qosprofile qp4 minbw 15% maxbw 100% priority high
config vlan sales qosprofile qp4
B D U G
LACK IAMOND SER UIDE
I M Q
NGRESS ODE
Description
Configures a QoS profile. Specify:
minbw — The minimum bandwidth
percentage guaranteed to be available
to this queue. The default setting is 0.
maxbw — The maximum bandwidth
percentage this queue is permitted to
use. The default setting is 100.
priority — The service priority for
this queue. Settings include low,
medium-low, medium, high. The default
setting is low. Available in egress mode,
only.
Allows you to configure one or more ports
to use a particular QoS profile. Available in
ingress mode, only.
Allows you to configure a VLAN to use a
particular QoS profile.
Disables recognition of the PACE bit.
Available in ingress mode, only.
S C
O ONFIGURATION
C Q S
ONFIGURING O
7-9