Spanning Tree Protocol (Stp); Factory Defaults - Extreme Networks BlackDiamond 6800 User Manual

B D O
LACK IAMOND VERVIEW
F D
ACTORY EFAULTS
Table 1-1 shows factory defaults for the BlackDiamond features.
Table 1-1: BlackDiamond Factory Defaults
Item
Port status
Serial or Telnet user account
Console port configuration
Web network management
SNMP read community string
SNMP write community string
RMON history session
RMON alarms
BOOTP
QoS
QoS monitoring
802.1p priority
802.3x flow control
Virtual LANs
802.1Q tagging
Spanning Tree Protocol
Forwarding database aging period
IP Routing
RIP
OSPF
IP multicast routing
IGMP snooping
DVMRP
GVRP
Port mirroring
1-8
Default Setting
Enabled on all ports
admin with no password and user with no password
9600 baud, 8 data bits, 1 stop bit, no parity, XON/XOFF
flow control enabled
Enabled
public
private
Enabled
Disabled
Enabled on the default VLAN ( default )
All traffic is part of the default queue in ingress mode
Automatic roving
Recognition enabled
Enabled on Gigabit Ethernet ports
One VLAN named default ; all ports belong to the default
VLAN; the default VLAN belongs to the STPD named s0
All packets are untagged on the default VLAN ( default)
Disabled for the switch; enabled for each port in the STPD
300 seconds (5 minutes)
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
B D U G
LACK IAMOND SER UIDE