Routing Configuration Example - Extreme Networks BlackDiamond 6800 User Manual

IP U R
NICAST OUTING
Table 8-4: ICMP Configuration Commands (continued)
Command
config irdp <mininterval> <maxinterval>
<lifetime> <preference>
unconfig icmp
unconfig irdp
disable icmp redirects {vlan <name> | all}
disable icmp unreachables {vlan <name> | all}
disable icmp useredirects
disable irdp {vlan <name> | all}
R C
OUTING ONFIGURATION
Figure 8-2 illustrates a switch that has three VLANs defined as follows:
• Finance
— Protocol-sensitive VLAN using the IP protocol
— All ports on slots 1 and 3 have been assigned
— IP address 192.207.35.1
8-16
Description
Configures the router advertisement message
timers, using seconds. Specify:
mininterval — The minimum amount of
time between router advertisements. The
default setting is 450 seconds.
maxinterval — The maximum time
between router advertisements. The default
setting is 600 seconds.
lifetime — The default setting is 1,800
seconds.
preference — The preference level of the
router. An IRDP client always uses the
router with the highest preference level.
Change this setting to encourage or
discourage the use of this router. The
default setting is 0.
Resets all ICMP settings to the default values.
Resets all router advertisement settings to the
default values.
Disables the generation of ICMP redirects on
one or more VLANs.
Disables the generation of ICMP unreachable
messages on one or more VLANs.
Disables the changing of routing table
information when an ICMP redirect message is
received.
Disables the generation of router advertisement
messages on one or more VLANs.
E
XAMPLE
B D U G
LACK IAMOND SER UIDE