Advertisement
Contacting
Raven
Industries
Damage to Machinery and Equipment
The operator must allow a safe distance between the machine's path and
other machinery or equipment. To determine a safe distance, the operator
should take into account any incorrect operation of the Autoboom boom
management system and the width of the booms.
Obstacle Avoidance
Autoboom CANNOT detect obstacles such as fences, trees, or boulders
that are not located within the path of the sensors or wheels. The machine
operator must identify and avoid obstacles that Autoboom sensors or
wheels are not able to detect while working in a field.
Operator Responsibilities
The operator must remain in complete control of the machine at all times.
Autoboom must be enabled to allow hands-free operation of the booms.
The operator remains fully responsible for the operation of the machine
and must remain in the operator's seat at all times while Autoboom is
enabled.
Disengaging Boom Control
The operator must manually lift the booms if an obstacle is in the line of
travel and is not detected by the sensors or wheels. Pressing the "Up"
function on the boom controller will disengage Autoboom if Boom Sense
wires have been installed.
We welcome your feedback about this manual. If you have any comments
or suggestions for improvement, please let us know by contacting our
Customer Support Center by any of the following methods:
• Via phone: 1-800-243-5435
• Via mail:
Raven Industries
Flow Control Division
205 E. 6th St.
Sioux Falls, SD 57104
• Via email: fcdinfo@ravenind.com
Manual # 016-0230-001
5
Advertisement
