Advertisement
Congratulations on your purchase of the Raven Autoboom system! This
system is designed to provide worry-free operation of your hydraulically
controlled booms. The following instructions are designed to assist you in
the proper installation of the system hardware. The Autoboom hydraulic
installation process is fairly straight forward, however, prior knowledge of
the machine's hydraulic system is beneficial. Be sure to follow the safety
and installation instructions within this manual and pay careful attention to
the hydraulic installation instructions. Improper installation could result in
a system that does not work correctly. After the completion of the hardware
installation, refer to the instructions in the PowerGlide, PowerGlide Plus
and UltraGlide Calibration and Operator's manual.
Note:
for the PowerGlide, PowerGlide Plus, and UltraGlide
Systems. Be sure to identify which system you have and
follow only the instructions for that system.
This manual contains the installation instructions
Manual # 016-0230-001
C
H A P T E R
I
N T RO D U C T I O N
1
Advertisement
