Static Ip Configuration In Microsoft Windows - ZyXEL Communications WX3310-B0 User Manual

If the WX3310 is using the static IP address, your computer needs to be in the same subnet as the
WX3310 in order to access the web configurator. Below you will find the steps to set a static IP on both
Windows 7 (Section 2.3.1 on page

2.3.1 Static IP Configuration in Microsoft Windows

Follow these steps to change your computer's IP address in Windows 7 operating system.
Click on the Network Icon
1
icon a small message window will appear, select Open Network and Sharing Center.
Note: You can also access the Network and Sharing Center by going to the Control Panel in
the Start Menu and clicking on Network and Sharing Center.
Once you have accessed the Network and Sharing Center, click on Local Area Connection to access
2
the adapter's settings.
After accessing the connection's general settings, click on the Properties button.
3
Chapter 2 The Web Configurator
19) and MAC OS X 10.11(Section 2.3.2 on page
located in the System Tray of your Task Bar. After you have clicked the
WX3310-B0 User's Guide
19
21) operating systems.