Technical Reference; Set Up Your Computer's Ip Address In Windows - ZyXEL Communications WRE6605 User Manual

Figure 11 Title Bar
Reboot
Factory
Reset
The icons provide the following functions.
Table 6 Title Bar: Web Configurator Icons
LABEL
Reboot
Reset
Logout

2.4 Technical Reference

2.4.1 Set Up your Computer's IP Address in Windows

This section shows you how to configure the IP settings on your computer in order for it to be able to
communicate with the WRE6605 in its initial configuration. To assign IP information instead of using a
dynamic IP, make sure that your network's computers have IP addresses that place them in the same
subnet.
To set up an IP address for Windows 7, 8, or 10, do the following:
Press the Windows + R buttons in your keyboard. Type ncpa.cpl to open the Network Connections
1
screen.
Chapter 2 The Web Configurator
Logout
DESCRIPTION
Click this icon to reboot the WRE6605 without turning the power off.
Click this icon to reset the WRE6605 back to factory-default settings.
Click this icon at any time to exit the Web Configurator.
WRE6605 User's Guide
18