Table of Contents
Advertisement
The following table displays the comparison of the different WiFi standards.
Table 15
WiFI Standards Comparison
WIFI
STANDARD
802.11b
802.11a/g
802.11n
802.11ac
802.11ax
* The maximum link rate is for reference under ideal conditions only.
10.4 Basic Wireless Network Screen
Use this screen to enable the wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the WX3310 from a computer connected to the wireless LAN and
you change the WX3310's SSID, channel or security settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the WX3310's new settings.
Click Networking > Wireless Network 5G/2.4G > Basic to open the Basic screen.
Figure 31 Networking > Wireless Network 5G/2.4G > Basic (Repeater Mode)
The following table describes the general wireless LAN labels in this screen.
Table 16 Networking > Wireless Network 5G/2.4G > Basic
LABEL
Network
Name(SSID)
Broadcast SSID
Chapter 10 Wireless LAN
MAXIMUM LINK
BAND
RATE*
11 Mbps
2.4 GHz
54 Mbps
2.4 GHz and 5 GHz
600 Mbps
2.4 GHz and 5 GHz
3.47 Gbps
5 GHz
573 Mbps
2.4 GHz
4.8 Gbps
5 GHz
DESCRIPTION
The SSID identifies the Service Set with which a wireless station is associated. Wireless stations
associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Select this to have the WX3310 broadcast the SSID in the area. If it is disabled the WX3310 does
not broadcast the SSID.
WX3310-B0 User's Guide
SIMULTANEOUS
CONNECTIONS
1
1
1
4
128
56
Advertisement
Table of Contents
