Table of Contents
Advertisement
10. Touch the text box next to the Password. Enter the Password if necessary and press
(Enter) on the keypad.
11. Press Apply to save the changes. The printer establishes a network connection using the
provided information.
12. Press Refresh to refresh the settings and see the SSID, network status, and IP address,
etc.
13. Press OK when you are finished. For advanced W iFi setup, see Appendix B,
Fi
Configuration".
Connectivity Troubleshooting
Message
Status appears as Not
Associated or Not
Inserted on W i-Fi
Settings screen.
3-12 System Administrator's Guide
Action
♦
Make sure the SSID, security, and password (key) were
entered correctly.
♦
If the SSID is set correctly but "not inserted" appears for
status, turn off the printer. Wait several seconds then
turn it on. The printer should obtain a Wi-Fi IP address.
If it does not, call Technical Support.
"Advanced W i-
Advertisement
Table of Contents
